CrackBridging Elastomeric Coating

Masonry and stucco can be major points of entry of water due to cracking. The best solution to this problem is Flexcoat. FlexCoat crackbridging elastomeric is carefully formulated to stay flexible to handle crack movement while providing a high quality water seal at the same time. And FlexCoat comes in hundreds of custom colors to match your decor. FlexCoat is a top quality above grade waterproofing that solves your problem and at the same time looks great.

Note: Chalky surfaces must be primed with SureBond primer before applying this product.

Curbs, Pitch Pockets, Roof Drains and Scuppers

These leak points require special attention to detail in flashing. These critical leak points must be well flashed with the full PremiumCoat System.

Note: Since many of these areas are heavy water collection points it is advised the BarrierGuard System be applied over the PremiumCoat System.

BarrierGuard will provide extra protection not only in water ponding conditions but also provide protection for water erosion areas. Please contact technical support for specific information.

Decks

Decks are roofs that you walk on and must be waterproofed with the complete PremiumCoat System. Special attention must be given to deck and wall junctions with Cant Strips. All posts, railings and walls must be treated. For increased protection, TrafficCoat abrasion resistant coating may be applied over the PremiumCoat System.

Flat Roofs

The entire field of flat roof can potentially leak and must be sealed using the complete PremiumCoat System. Care must be taken to prepare the surface by power washing and making any necessary substrate repairs before applying the PremiumCoat System. Ponding water conditions must be corrected at this time. And an attention to detail of all flashings and parapet walls is a must.

Fountains

Fountains, fish ponds, planters, and retaining walls and other masonry structures that require waterproofing can be treated by the BarrierGuard System. There are many special applications that are difficult to waterproof but Hydro-Stop's BarrierGuard System works quite well.

Gutters can be treated with the PremiumCoat System but the gutter must be pitched correctly. After proper preparation, including pressure washing and rust proofing using StableRust Primer, the PremiumCoat System is applied.

---

Metal Roofs

Commercial metal roofs can be sealed by applying the PremiumCoat System over all leak points of the roof. Laps, seams, penetrations, skylights, screw heads and parapets must be sealed. Once the leak points have been properly flashed, the entire roof field is coated with two coats of FinishCoat. Proper preparation and priming of rusted areas with StableRust Primer is most important.

Parapet Walls and Copings

Parapets and Copings are part of the roof and are a major source of water intrusion. Water normally enters at the junction of wall and roof. It also enters from the top of the coping. The parapet wall can be completely sealed with the

Penetrations

Penetrations include any object that protrudes through the roof field. These are leak points and must be well sealed with the PremiumCoat System. Care should be taken to flash at least 6" up the penetrations and 6" down the penetrations. Please contact

Skylights

Skylights are flashed with the PremiumCoat System. The surface must be clean and the perimeter interface of roof and skylight must be completely sealed.